Appendix: Device Data Base File (Gsd File) - Siemens 7ME30 Instruction Manual

9

Appendix: Device Data Base File (GSD File)

;*********************************************************************
;**
;** GSD Datei für SITRANS F, SIEMENS AG
;** MLFB: 7ME30**-*****-1***
;** Stand: 25.11.1999
;** SIEM8091.GSD
;*********************************************************************
Profibus_DP
GSD_Revision
Vendor_Name
Model_Name
Revision
Ident_Number
Protocol_Ident
Station_Type
FMS_supp
Hardware_Release
Software_Release
Bitmap_Device
31.25_supp
45.45_supp
93.75_supp
MaxTsdr_31.25
MaxTsdr_45.45
MaxTsdr_93.75
Redundancy
Repeater_Ctrl_Sig
24V_Pins
Freeze_Mode_supp
Sync_Mode_supp
Auto_Baud_supp
Set_Slave_Add_supp
Min_Slave_Intervall = 250
Modular_Station
Max_Module
Max_Input_Len
Max_Output_Len
Max_Data_Len
Fail_Safe
Slave_Family
Max_Diag_Data_Len
;----------- Description of device related diagnosis: ---------------------
;
Unit_Diag_Bit(16)
Unit_Diag_Bit(17)
Unit_Diag_Bit(24)
Unit_Diag_Bit(25)
Unit_Diag_Bit(26)
Unit_Diag_Bit(27)
Unit_Diag_Bit(28)
Unit_Diag_Bit(29)
Unit_Diag_Bit(30)
Unit_Diag_Bit(31)
Unit_Diag_Bit(32)
Unit_Diag_Bit(33)
Unit_Diag_Bit(34)
Unit_Diag_Bit(35)
Unit_Diag_Bit(36)
Unit_Diag_Bit(37)
Unit_Diag_Bit(38)
SITRANS F with PROFIBUS PA
C79000-B5676-C114-03
= 2
= "SIEMENS AG"
= "SITRANS F"
= "Revision 02"
= 0x8091
= 0
= 0
= 0
= "A01"
= "Z02"
= "SIE8091n"
= 1
= 1
= 1
= 100
= 250
= 1000
= 0
= 0
= 0
= 0
= 0
= 0
= 1
= 1
= 7
= 35
= 3
= 38
= 0
= 12
= 20
= "Error appears"
= "Error disappears"
= "Hardware failure electronics"
= "Hardware failure mechanics"
= "Motor temperature too high"
= "Electronic temperature too high"
= "Memory error"
= "Measurement failure"
= "Device not initialized"
= "Device initialization failed"
= "Zero point error"
= "Power supply failed"
= "Configuration invalid"
= "Restart"
= "Coldstart"
= "Maintenance required"
= "Characteristics invalid"
Instruction Manual
**
**
**
**
**
47