Functions
7.11 Reflexor
● The horizontal scale represents flow velocity with the higher velocities on the right and lower
● The vertical axis is relative amplitude or magnitude; each bar shows the relative amplitude
The reported flow rate is the mean value of the included Spectra Graph bars. It is computed
by excluding signals that are lower (to the left of) than the Low Limit Cursor or higher (to the
right of) than the High Flow Cursor or lower (under) than the Noise Cursor.
104
velocities on the left.
for a velocity range.
①
Meter Type
②
Measurement Channel
③
Site Name
④
High Limit Cursor
Figure 7-4
Spectra Graph Display Screen
⑤
Flow Velocity Range
⑥
Noise Level Set Cursor
⑦
Low Limit Cursor
⑧
Signal Amplitude
FUP1010 IP67 Portable Flowmeter
Operating Instructions, 02/2010, A5E02951522A Revision 01