Disturbance Report - ABB REC650 Applications Manual

1MRK 511 286-UUS A
12.7
12.7.1
12.7.2
Application manual

Disturbance report

Identification
Function description
Disturbance report
Analog input signals
Analog input signals
Analog input signals
Analog input signals
Binary input signals
Binary input signals
Binary input signals
Binary input signals
Binary input signals
Binary input signals
Application
To get fast, complete and reliable information about disturbances in the primary and/or in
the secondary system it is very important to gather information on fault currents, voltages
and events. It is also important having a continuous event-logging to be able to monitor in
an overview perspective. These tasks are accomplished by the disturbance report function
DRPRDRE and facilitate a better understanding of the power system behavior and related
primary and secondary equipment during and after a disturbance. An analysis of the
recorded data provides valuable information that can be used to explain a disturbance,
basis for change of IED setting plan, improve existing equipment, and so on. This
information can also be used in a longer perspective when planning for and designing new
installations, that is, a disturbance recording could be a part of Functional Analysis (FA).
Disturbance report DRPRDRE, always included in the IED, acquires sampled data of all
selected analog and binary signals connected to the function blocks that is,
• maximum 30 external analog signals,
• 10 internal derived analog signals, and
• 96 binary signals.
Disturbance report function is a common name for several functions that is, Indications,
Event recorder, Sequential of events, Trip value recorder, Disturbance recorder.
IEC 61850 IEC 60617
identification identification
DRPRDRE -
A1RADR -
A2RADR -
A3RADR -
A4RADR -
B1RBDR -
B2RBDR -
B3RBDR -
B4RBDR -
B5RBDR -
B6RBDR -
Section 12
Monitoring
ANSI/IEEE C37.2
device number
-
-
-
-
-
-
-
-
-
-
-
295