Time Synchronization - ABB REC650 Applications Manual

Section 15
Basic IED functions
15.2
15.2.1
326
Events are also generated:
• whenever any setting in the IED is changed.
The internal events are time tagged with a resolution of 1 ms and stored in a list. The list
can store up to 40 events. The list is based on the FIFO principle, that is, when it is full, the
oldest event is overwritten. The list can be cleared via the local HMI .
The list of internal events provides valuable information, which can be used during
commissioning and fault tracing.

Time synchronization

Identification
Function description
Time synchronization
Function description
Time system, summer time begins
Function description
Time system, summer time ends
Function description
Time synchronization via IRIG-B
Function description
Time synchronization via SNTP
Function description
Time zone from UTC
IEC 61850 IEC 60617
identification identification
TIMESYNCHGE -
N
IEC 61850 IEC 60617
identification identification
DSTBEGIN -
IEC 61850 IEC 60617
identification identification
DSTEND -
IEC 61850 IEC 60617
identification identification
IRIG-B -
IEC 61850 IEC 60617
identification identification
SNTP -
IEC 61850 IEC 60617
identification identification
TIMEZONE -
1MRK 511 286-UUS A
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
Application manual