Application - ABB REC650 Applications Manual

Section 11
Logic
11.3.2
274
Function description
Settable timer function block
Function description
ANDQT function block
Function description
Set/reset logic component
Function description
Reset/set logic component
Function description
INVALIDQT function block
Function description
Single indication signal combining
function block
Function description
Single indication signal extractor
function block

Application

A set of standard logic blocks, like AND, OR etc, and timers are available for adapting the
IED configuration to the specific application needs. Additional logic blocks that, beside
the normal logical function, have the capability to propagate timestamp and quality are
also available. Those blocks have a designation including the letters QT, like ANDQT,
ORQT etc.
IEC 61850 IEC 60617
identification identification
TIMERSETQT -
IEC 61850 IEC 60617
identification identification
ANDQT -
IEC 61850 IEC 60617
identification identification
SRMEMORYQT -
IEC 61850 IEC 60617
identification identification
RSMEMORYQT -
IEC 61850 IEC 60617
identification identification
INVALIDQT -
IEC 61850 IEC 60617
identification identification
INDCOMBSPQT -
IEC 61850 IEC 60617
identification identification
INDEXTSPQT -
1MRK 511 286-UUS A
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
ANSI/IEEE C37.2
device number
-
Application manual