Replacement Modules - GE UR series Instruction Manual

2.1 INTRODUCTION
The order codes for the reduced size vertical mount units are shown below.
Table 2–4: L60 ORDER CODES (REDUCED SIZE VERTICAL UNITS)
L60 - * ** - *
BASE UNIT L60 | |
CPU E |
G |
H |
J |
K |
L |
M |
2
N |
P |
R |
SOFTWARE 00
03
MOUNT/COATING
FACEPLATE/ DISPLAY
POWER SUPPLY
CT/VT MODULES
DIGITAL INPUTS/OUTPUTS
TRANSDUCER
INPUTS/OUTPUTS
(select a maximum of 3 per unit)
INTER-RELAY
COMMUNICATIONS
(select a maximum of 1 per unit)
Replacement modules can be ordered separately as shown below. When ordering a replacement CPU module or face-
plate, please provide the serial number of your existing unit.
Not all replacement modules may be applicable to the L60 relay. Only the modules specified in the order codes are
available as replacement modules.
NOTE
Replacement module codes are subject to change without notice. Refer to the GE Multilin ordering page at
www.GEindustrial.com/multilin/order.htm
NOTE
2-6
* * - F ** - H ** - L ** - N
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
V | | | | |
B | | | | |
C | | | |
D | | | |
R | | | |
A | | | |
K | | | |
M | | | |
Q | | | |
U | | | |
L | | | |
N | | | |
T | | | |
V | | | |
H | | |
L | | |
8P | 8F
XX XX
4A 4A
4B 4B
4C 4C
4D 4D
4L
67
6A 6A
6B 6B
6C 6C
6D 6D
6E 6E
6F 6F
6G 6G
6H 6H
6K 6K
6L
6M 6M
6N 6N
6P 6P
6R 6R
6S 6S
6T 6T
6U 6U
6V 6V
5A 5A
5C 5C
5D 5D
5E 5E
5F 5F
for the latest details concerning L60 ordering options.
L60 Line Phase Comparison System
** - R ** Reduced Size Vertical Mount
| | Base Unit
| | RS485 and RS485
| | RS485 and multi-mode ST 10Base-F
| | RS485 and multi-mode ST redundant 10Base-F
| | RS485 and multi-mode ST 100Base-FX
| | RS485 and multi-mode ST redundant 100Base-FX
| | RS485 and single mode SC 100Base-FX
| | RS485 and single mode SC redundant 100Base-FX
| | RS485 and 10/100Base-T
| | RS485 and single mode ST 100Base-FX
| | RS485 and single mode ST redundant 100Base-FX
| | No software options
| | IEC 61850; not available for Type E CPUs
| | Vertical (3/4 rack)
| | Vertical (3/4 rack) with harsh environmental coating
| | English display
| | French display
| | Russian display
| | Chinese display
| | Enhanced front panel with English display
| | Enhanced front panel with French display
| | Enhanced front panel with Russian display
| | Enhanced front panel with Chinese display
| | Enhanced front panel with English display and user-programmable pushbuttons
| | Enhanced front panel with French display and user-programmable pushbuttons
| | Enhanced front panel with Russian display and user-programmable pushbuttons
| | Enhanced front panel with Chinese display and user-programmable pushbuttons
| | 125 / 250 V AC/DC power supply
| | 24 to 48 V (DC only) power supply
| | 4CT, 2 communications channels, standard 4CT/4VT (breaker-and-a-half)
XX No Module
| 4 Solid-State (no monitoring) MOSFET outputs
| 4 Solid-State (voltage with optional current) MOSFET outputs
| 4 Solid-State (current with optional voltage) MOSFET outputs
| 16 digital inputs with Auto-Burnishing
4L | 14 Form-A (no monitoring) Latching outputs
67 | 8 Form-A (no monitoring) outputs
| 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 digital inputs
| 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 digital inputs
| 8 Form-C outputs
| 16 digital inputs
| 4 Form-C outputs, 8 digital inputs
| 8 Fast Form-C outputs
| 4 Form-A (voltage with optional current) outputs, 8 digital inputs
| 6 Form-A (voltage with optional current) outputs, 4 digital inputs
| 4 Form-C and 4 Fast Form-C outputs
6L | 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 digital inputs
| 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 digital inputs
| 4 Form-A (current with optional voltage) outputs, 8 digital inputs
| 6 Form-A (current with optional voltage) outputs, 4 digital inputs
| 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs
| 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs
| 4 Form-A (no monitoring) outputs, 8 digital inputs
| 6 Form-A (no monitoring) outputs, 4 digital inputs
| 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 digital inputs
| 4 dcmA inputs, 4 dcmA outputs (only one 5A module is allowed)
| 8 RTD inputs
| 4 RTD inputs, 4 dcmA outputs (only one 5D module is allowed)
| 4 RTD inputs, 4 dcmA inputs
| 8 dcmA inputs
2A C37.94SM, 1300nm single-mode, ELED, 1 channel single-mode
2B C37.94SM, 1300nm single-mode, ELED, 2 channel single-mode
2E Bi-phase, single channel
2F Bi-phase, dual channel
2G IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel
2H IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels
72 1550 nm, single-mode, LASER, 1 Channel
73 1550 nm, single-mode, LASER, 2 Channel
74 Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, LASER
75 Channel 1 - G.703; Channel 2 - 1550 nm, Single-mode LASER
76 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 1 Channel
77 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels
7A 820 nm, multi-mode, LED, 1 Channel
7B 1300 nm, multi-mode, LED, 1 Channel
7C 1300 nm, single-mode, ELED, 1 Channel
7D 1300 nm, single-mode, LASER, 1 Channel
7E Channel 1 - G.703; Channel 2 - 820 nm, multi-mode
7F Channel 1 - G.703; Channel 2 - 1300 nm, multi-mode
7G Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED
7H 820 nm, multi-mode, LED, 2 Channels
7I 1300 nm, multi-mode, LED, 2 Channels
7J 1300 nm, single-mode, ELED, 2 Channels
7K 1300 nm, single-mode, LASER, 2 Channels
7L Channel 1 - RS422; Channel 2 - 820 nm, multi-mode, LED
7M Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED
7N Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED
7P Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, LASER
7Q Channel 1 - G.703; Channel 2 - 1300 nm, single-mode LASER
7R G.703, 1 Channel
7S G.703, 2 Channels
7T RS422, 1 Channel
7W RS422, 2 Channels
2 PRODUCT DESCRIPTION

2.1.3 REPLACEMENT MODULES

GE Multilin
http://