GE UR series Instruction Manual page 26

1.3 ENERVISTA UR SETUP SOFTWARE 1 GETTING STARTED
4. Set the computer to "Obtain a relay address automatically" as shown below.
1
If this computer is used to connect to the Internet, re-enable any proxy server settings after the laptop has been discon-
nected from the L60 relay.
AUTOMATIC DISCOVERY OF ETHERNET DEVICES
The EnerVista UR Setup software can automatically discover and communicate to all UR-series IEDs located on an Ether-
net network.
Using the Quick Connect feature, a single click of the mouse will trigger the software to automatically detect any UR-series
relays located on the network. The EnerVista UR Setup software will then proceed to configure all settings and order code
options in the Device Setup menu, for the purpose of communicating to multiple relays. This feature allows the user to
identify and interrogate, in seconds, all UR-series devices in a particular location.
1-14 L60 Line Phase Comparison System GE Multilin