Replacement Modules - GE T60 Instruction Manual

ORDER CODES
T60 - * **
PROCESS BUS MODULE
CONTACT INPUTS/OUTPUTS
2
INTER-RELAY
COMMUNICATIONS
(select a maximum of 1 per unit)
For the last module, rear slot P is used for digital input/
output modules; rear slot R is used for inter-relay
communications modules.

2.3.3 Replacement modules

Replacement modules can be ordered separately. When ordering a replacement CPU module or front panel, provide the
serial number of your existing unit.
Not all replacement modules apply to the T60 relay. The modules specified in the order codes for the T60 are available as
replacement modules for the T60.
The order codes shown here are subject to change without notice. See the web page for the product for the latest options.
Table 2-8: UR order codes for replacement modules, horizontal units
POWER SUPPLY
redundant supply only available in horizontal
units and must be same type as main supply
CPU
2-20
- * * * - F ** - H ** - M ** - P/R **
| 81 |
XX XX XX
4A
4B
4C
4D
4L
67
6A
6B
6C
6D
6E
6F
6G
6H
6K
6L
6M
6N
6P
6R
6S
6T
6U
6V
6W
6X
UR - ** - *
| SH A | 125 / 300 V AC/DC
| SL H | 24 to 48 V (DC only)
| T | RS485 with 3 100Base-FX Ethernet, multimode, SFP with LC
| U | RS485 with 1 100Base-TX Ethernet, SFP RJ-45 + 2 100Base-FX Ethernet, multimode, SFP with LC
| V | RS485 with 3 100Base-TX Ethernet, SFP with RJ-45
| W | RS485 with 2 100Base-FX Ethernet, multimode ST + 10/100Base-TX Ethernet, RJ-45
Reduced Size Vertical Mount (see note regarding P/R slot below)
| Eight-port digital process bus module
XX No Module
| 4 Solid-State (no monitoring) MOSFET outputs
| 4 Solid-State (voltage with optional current) MOSFET outputs
| 4 Solid-State (current with optional voltage) MOSFET outputs
| 16 Contact inputs with Auto-Burnishing (maximum of three modules within a case)
| 14 Form-A (no monitoring) Latching outputs
| 8 Form-A (no monitoring) outputs
| 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 contact inputs
| 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 contact inputs
| 8 Form-C outputs
| 16 Contact inputs
| 4 Form-C outputs, 8 contact inputs
| 8 Fast Form-C outputs
| 4 Form-A (voltage with optional current) outputs, 8 contact inputs
| 6 Form-A (voltage with optional current) outputs, 4 contact inputs
| 4 Form-C and 4 Fast Form-C outputs
| 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 contact inputs
| 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 contact inputs
| 4 Form-A (current with optional voltage) outputs, 8 contact inputs
| 6 Form-A (current with optional voltage) outputs, 4 contact inputs
| 2 Form-A (no monitoring) and 2 Form-C outputs, 8 contact inputs
| 2 Form-A (no monitoring) and 4 Form-C outputs, 4 contact inputs
| 4 Form-A (no monitoring) outputs, 8 contact inputs
| 6 Form-A (no monitoring) outputs, 4 contact inputs
| 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 contact inputs
| 30 Contact inputs - pin terminals (max 4 modules)
| 18 Form-A (no monitoring) outputs - pin terminals (max 4 modules)
2A C37.94SM, 1300nm single-mode, ELED, 1 channel single-mode
2B C37.94SM, 1300nm single-mode, ELED, 2 channel single-mode
2E Bi-phase, single channel
2F Bi-phase, dual channel
2G IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel
2H IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels
2I Channel 1 - IEEE C37.94, MM, 64/128 kbps; Channel 2 - 1300 nm, single-mode, Laser
2J Channel 1 - IEEE C37.94, MM, 64/128 kbps; Channel 2 - 1550 nm, single-mode, Laser
72 1550 nm, single-mode, Laser, 1 Channel
73 1550 nm, single-mode, Laser, 2 Channel
74 Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, Laser
75 Channel 1 - G.703; Channel 2 - 1550 nm, single-mode Laser
76 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 1 Channel
77 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels
7A 820 nm, multimode, LED, 1 Channel
7B 1300 nm, multimode, LED, 1 Channel
7C 1300 nm, single-mode, ELED, 1 Channel
7D 1300 nm, single-mode, Laser, 1 Channel
7E Channel 1 - G.703; Channel 2 - 820 nm, multimode
7F Channel 1 - G.703; Channel 2 - 1300 nm, multimode
7G Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED
7H 820 nm, multimode, LED, 2 Channels
7I 1300 nm, multimode, LED, 2 Channels
7J 1300 nm, single-mode, ELED, 2 Channels
7K 1300 nm, single-mode, Laser, 2 Channels
7L Channel 1 - RS422; Channel 2 - 820 nm, multimode, LED
7M Channel 1 - RS422; Channel 2 - 1300 nm, multimode, LED
7N Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED
7P Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, Laser
7Q Channel 1 - G.703; Channel 2 - 1300 nm, single-mode Laser
7R G.703, 1 Channel
7S G.703, 2 Channels
7T RS422, 1 Channel
7W RS422, 2 Channels
T60 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 2: PRODUCT DESCRIPTION