GE UR series Instruction Manual page 98
L60 line phase comparison system
Hide thumbs
Also See for UR series:
- Instruction manual (470 pages) ,
- Manual (433 pages) ,
- Release notes (33 pages)
Table of Contents
Advertisement
3.4 MANAGED ETHERNET SWITCH MODULES
2.
Enter "3.94.247.229" in the IP Address field and "255.255.252.0" in the Subnet Mask field, then click OK.
The software will send the new settings to the L60 and prompt as follows when complete.
3.
Cycle power to the L60 and switch module to activate the new settings.
b) SAVING THE ETHERNET SWITCH SETTINGS TO A SETTINGS FILE
The L60 allows the settings information for the Ethernet switch module to be saved locally as a settings file. This file con-
tains the advanced configuration details for the switch not contained within the standard L60 settings file.
3
This feature allows the switch module settings to be saved locally before performing firmware upgrades. Saving settings
files is also highly recommended before making any change to the module configuration or creating new setting files.
The following procedure describes how to save local settings files for the Ethernet switch module.
1.
Select the desired device from site tree in the online window.
2.
Select the Settings > Product Setup > Communications > Ethernet Switch > Ethernet Switch Settings File >
Retreive Settings File item from the device settings tree.
The system will request the name and destination path for the settings file.
3.
Enter an appropriate folder and file name and click Save.
All settings files will be saved as text files and the corresponding file extension automatically assigned.
c) UPLOADING ETHERNET SWITCH SETTINGS FILES TO THE MODULE
The following procedure describes how to upload local settings files to the Ethernet switch module. It is highly recom-
mended that the current settings are saved to a settings file before uploading a new settings file.
It is highly recommended to place the switch offline while transferring setting files to the switch. When transferring
settings files from one switch to another, the user must reconfigure the IP address.
NOTE
1.
Select the desired device from site tree in the online window.
2.
Select the Settings > Product Setup > Communications > Ethernet Switch > Ethernet Switch Settings File >
Transfer Settings File item from the device settings tree.
3-44
L60 Line Phase Comparison System
3 HARDWARE
GE Multilin
Advertisement
Table of Contents
