Ethernet Switch - GE UR series Instruction Manual

6 ACTUAL VALUES
PATH: ACTUAL VALUES STATUS

ETHERNET SWITCH

MESSAGE
MESSAGE
MESSAGE
These actual values appear only if the L60 is ordered with an Ethernet switch module (type 2S or 2T). The status informa-
tion for the Ethernet switch is shown in this menu.
• SWITCH 1 PORT STATUS to SWITCH 6 PORT STATUS: These values represents the receiver status of each port on
the Ethernet switch. If the value is "OK", then data is being received from the remote terminal; If the value is "FAIL",
then data is not being received from the remote terminal or the port is not connected.
• SWITCH MAC ADDRESS: This value displays the MAC address assigned to the Ethernet switch module.
GE Multilin
ETHERNET SWITCH
SWITCH 1 PORT
STATUS: OK
SWITCH 2 PORT
STATUS: OK
↓
SWITCH 6 PORT
STATUS: OK
SWITCH MAC ADDRESS:
00A0F40138FA
L60 Line Phase Comparison System
6.2.17 ETHERNET SWITCH
Range: FAIL, OK
Range: FAIL, OK
Range: FAIL, OK
Range: standard MAC address format
6.2 STATUS
6
6-9