Table of Contents
Advertisement
Audio Config Page
Audio inputs are configured from the the Audio Config page. Click the Audio Config
icon on the Global Navigation Ribbon (see figure 42,
panels. Input Settings (
format and gain. An indictor (
input audio source. Global Settings (
volume, and talk-over threshold and duck level.
2
2
2
4
4
4
5
5
5
Figure 42.
Input – Click the row to select an input. The
4
row highlights.
Audio Format – Analog inputs 1 and 2
5
always display Analog. Digital inputs 1
to 4 default to Auto. To force the input to
either Analog only or Digital only, use
the drop-down list and select the desired
format.
Analog Input Gain – To set the gain,
6
enter a level between -18 and 24 (1 dB
increments) in the dB field below the control
and press <Enter>, use the arrows, or move
the slider. This gain control is only available
for inputs 1 and 2, or inputs 3 to 6 if they are
set for analog.
Audio Clip – The audio clip indicator lights
7
red when signal overload conditions of the
selected input exist.
Mic Input Gain – To set the microphone
8
input level, enter a level between -18 and 60
(1 dB increments) in the dB field below the
control and press <Enter>, use the arrows,
or move the slider.
figure 42
) allows selection of the input and configuration of the input
2
) gives a visual reference of audio clipping for the selected
7
6
6
6
Audio Configuration
) to open this page. There are two
1
) configure the mic input level, program output
3
1
1
3
3
3
7
7
7
8
8
8
9
9
9
¢
¢
¢
£
£
£
Mic Mute – Press to mute the microphone
9
input. The button turns red.
Threshold: – Sets the level of microphone
¢
volume where the microphone input
overrides the program audio output (see
Talk-over Control Using PCS
page). The range is 0 to 30 dB. Default is 8
dB.
Duck Level: – Set the output volume when
£
a microphone is active (see
Control Using PCS
on the next page). The
range is 0 to 30 dB. Default is 6 dB.
Volume – Set the variable audio out (see
¤
Program Audio Output
Volume Mute – Press to mute the output
¥
volume input. The button turns red (see
Program Audio Mute
MPS 602 • Configuration Software
¤
¤
¤
¥
¥
¥
on the next
Talk-over
on page 8).
on page 17).
40
Advertisement
Table of Contents
