Table of Contents
Advertisement
Configuration Pages
The configuration pages contain options for input and output configuration, EDID
management, image settings, image size and position, audio configuration, and device
settings (see figure 38).
Figure 38.
Input Configuration
Click the Input Config icon (see figure 39,
the page.
The Input Configuration page consists of user configurable fields and status
displays for each input. These include input number, signal type, HDCP status, and HDCP
authorization.
Figure 39.
The currently selected input is highlighted in blue with an amber bar to the left. HDCP
Authorized selection can be toggled whether the input is selected or not.
Input – The name associated with an input
2
channel is the number that corresponds to the
rear panel input number. It cannot be changed.
Signal Type – From the Signal Type
3
drop-down list, select the signal type for inputs
1 and 2 from RGB (default) and YUV. For all other
inputs, Digital Video (HDMI/DVI) is the only
available signal type.
Global Navigation Bar
figure 39
Input Configuration
4
5
) on the Global Navigation Ribbon to open
1
HDCP Status – The status text indicates
whether a digital video signal is connected and
also whether it requires HDCP.
HDCP Authorized – Select the HDCP
Authorized check box for each input to
enable or disable the HDCP Authorized feature
(inputs 3 to 6). This feature determines if a digital
input reports as an HDCP authorized sink to a
source.
NOTE: This option is not available for analog
inputs 1 and 2.
MPS 602 • Configuration Software
36
Advertisement
Table of Contents
