Table of Contents
Advertisement
Device Menu - Update Firmware
This option uploads firmware from the host device to the connected device.
NOTE: If necessary, download new firmware from the Extron website (see
Firmware
on page 58).
1.
From the Device drop-down list (see
Firmware (
). A dialog box opens for permission to continue (see figure 25).
4
Figure 25.
Update Firmware Dialog Warning
2.
Click Continue (see figure 25,
The Update Firmware dialog continues (see figure 26).
Figure 26.
Update Firmware Dialog, Select Firmware File
3.
Click Browse (see figure 26,
4.
Navigate to the firmware file location and select the file. Valid firmware files have an
.S19 file extension. Click Open. The firmware file is selected and you are returned to the
Update Firmware dialog with the file (see figure 27,
Figure 27.
Update Firmware Dialog, Firmware File Selected
5.
Click Update (
). A progress bar follows the firmware upload to the device. The dialog
2
closes upon completion and verification of a successful update.
figure
22,
on page 27), select Update
4
) to proceed.
1
).
1
1
MPS 602 • Configuration Software
Updating
).
29
Advertisement
Table of Contents
