Table of Contents
Advertisement
Breakaway Analog Audio check box (Analog Inputs 1 and 2)
Select the Breakaway Analog Audio check box (see figure 37,
buttons separate into two columns: video (
2
2
3
3
4
4
5
5
1
1
6
6
7
7
8
8
Figure 37.
AV Controls and Input Configuration Page with Audio Breakaway
To select a separate audio input using Breakaway Analog Audio:
In the Video column (
•
2
to the video output (Input 3 selected in figure 37).
•
In the Audio column (
3
to the audio output (Input 1 is selected in figure 37).
NOTES:
•
Audio breakaway is not available to inputs configured for digital audio formats.
•
Video breakaway is not available from inputs configured for digital video formats.
The indicators on the left of the Input Configuration row indicate the status of the
inputs.
Green (
), indicates the current video source.
•
5
•
Red (
), indicates the current audio source.
4
Video and Audio Mute
•
Click the Video Mute button (
The button turns red
Click the Audio Mute button (
•
The button turns red
•
Click the AV Mute button (
along with the Video Mute and Audio Mute buttons.
To unmute or unfreeze any signal, click the appropriate button. The button reverts to the
default color, indicating the signal has been unmuted or unfrozen.
) and audio (
2
), click the input associated with the video you want to switch
), click the input associated with the audio you want to switch
) to mute only the video output.
6
.
) to globally mute audio.
7
.
) to mute both video and audio. The button turns red,
8
MPS 602 • Configuration Software
). The AV Inputs
1
).
3
35
Advertisement
Table of Contents
