Table of Contents
Advertisement
4.
5.
6.
Starting the Software
Open the PCS program from the Start menu or desktop shortcut. The program opens to
the Device Discovery page. The MPS 602 supports USB connection only, however, all
devices supported by PCS are listed in the Device Discovery panel (see figure 17).
NOTE: You might need to right-click the software start icon and desktop shortcut, then
Figure 17.
NOTE: PCS versions prior to 2.0 do not have the Device Discovery feature. Download
The configuration screens and panels can be viewed offline, however, offline device
configuration is not supported for the MPS 602 switchers.
Two help files are available. One is accessed from the right side of the start-up page (see
figure 17,
The second, accessed from the device tab after the connecting to the device (see
Menu - Device Help
interface.
Submit required information to start the download. Note where the file is saved.
Open the executable (.exe) file from the save location.
Follow the onscreen instructions. By default, the installation creates a directory in the
Program Files or Program Files (x86) folder.
figure 17
select "Open as administrator" to start the program.
Start-up Page
the latest version of PCS (see
and
) and assists with the PCS software operation.
1
2
on page 30) provides assistance with the connected device user
Installing the Software
on the previous page).
MPS 602 • Configuration Software
Device
24
Advertisement
Table of Contents
