Table of Contents
Advertisement
Using the Software and Device Menus
The PCS software provides configuration and operation of the connected device from a
control device (see figure 21).
Figure 21.
Each device tab has a drop-down menu on the tab (see figure 21,
configuration options and a Software menu (
information options .
Device Menu
The Device drop-down menu (see figure 22), contains options for disconnecting from the
device, changing hardware and communication settings, resetting the device, updating
firmware, accessing the device specific help file and viewing software version information.
Figure 22.
Disconnect
This option disconnects the PCS program and closes the device tab.
From the Device drop-down menu, select Disconnect (
NOTE: If a device is disconnected, the Disconnect option is disabled until it is
1
1
AV Controls and Input Configuration Page (MPS 602 SA Shown)
figure 22
Device Menu (MPS 602 SA Shown)
connected again.
) for device-specific
1
) for PCS software configuration and
2
).
1
MPS 602 • Configuration Software
2
2
27
Advertisement
Table of Contents
