Table of Contents
Advertisement
Click the Device Name tab (see figure 46).
Figure 46.
Hardware Settings Panel - Device Name
The Device Name tab allows you to:
Enter a Device Name – Enter any combination of letters and numbers (no spaces)
•
to create a more identifiable name for the connected device.
Reset to Default – Click to reset the connected device name to factory default.
•
Front Panel Lockout (Executive mode) (see
3
Executive mode mirrors the front panel function (see
(Executive Mode)
on page 15).
Select from three modes:
Unlock Front Panel – No lockout. All front panel buttons and controls are open.
•
Mode 1: Lock Front Panel – All front panel buttons and controls are locked out.
•
Mode 2: Lockout Mic Controls – Only the Mic button and control are locked out
•
(see figure 12,
H
Auto Switch – This mode mode automatically switches inputs based on detected input
4
signals (see
Auto-input Switching
click the Enable Auto Switch check box (see
check mark is placed in the box when the feature is enabled.
Next, select the input priority from the two selections:
Priority to the Highest Active Input Number — Automatically switches the input
•
to the highest numbered input with an active signal.
Priority to the Lowest Active Input Number — Automatically switches the input
•
to the lowest numbered input with an active signal.
figure 44
and
on page 13).
I
on page 14). To enable Auto-input switching,
figure
MPS 602 • Configuration Software
on the previous page) –
Front Panel Security Lockout
44,
on the previous page). A
4
43
Advertisement
Table of Contents
