Table of Contents
Advertisement
Filtering Available EDID
Use the drop-down lists (see
the Filter tab to limit the number of EDIDs displayed in the Available EDIDs and
Connected Outputs panels.
1.
From the Resolution drop-down list (
2.
From the Refresh Rate drop-down list (
3.
From the Video Format drop-down list (
4.
From the Audio Format drop-down list (
5.
Press Clear (
) to return all four filters to Any.
6
Assigning an EDID
To assign an EDID to selected inputs:
1.
From the inputs group panel (see the table of inputs,
boxes for the desired inputs (
2.
From the Favorites (
panel on the left, select the desired EDID.
3.
From the inputs group box, click Assign (
or inputs.
To assign an EDID to all inputs:
1.
From the Favorites (
panel on the left, select the desired EDID.
2.
From the inputs group box, click Assign to All (
NOTE: Checked and unchecked inputs are ignored. The selected EDID is assigned
to all inputs.
To match the selected inputs to the current output resolution:
Matching the output resolution is the default value for all inputs.
1.
From the inputs group box (
inputs (
).
£
2.
In the Connected Outputs panel (
be connected).
Adding EDIDs to the EDID Library
1.
Click Add EDID to Library (
2.
Navigate to the location with the desired EDID file, and select it.
NOTE: Valid EDID files have a .bin file extension.
3.
Click Open. The EDID is added to the Available EDIDs panel (
Saving EDID to the EDID Library
1.
From the Favorites (
panel on the left, select the desired EDID, right-click on an unsaved EDID.
2.
Select Save to EDID Library.
3.
Click OK to save the file.
NOTE: Saving an EDID exports an HDMI, LPCM-2Ch EDID to the PC. The file is
saved as a .bin file.
figure
40,
,
,
,
2
3
4
5
), select a specific resolution or Any.
2
), select a specific refresh rate or Any.
3
), select a specific refresh rate or Any.
4
), select a specific refresh rate or Any.
5
).
£
), Connected Outputs (
7
) to assign the EDID to the selected input
¤
), Connected Outputs (
7
) on the right, select the check boxes for the desired
¢
), click Match Output (an output display must
8
). The Browse Add EDID to Library dialog opens.
¦
), Connected Outputs (
7
MPS 602 • Configuration Software
,
on the previous page) in
6
) on the right, select the check
¢
) or Available EDIDs (
8
) or Available EDIDs (
8
).
¥
).
9
) or Available EDIDs (
8
)
9
)
9
)
9
38
Advertisement
Table of Contents
