Table of Contents
Advertisement
Device Configuration
After connection to the MPS 602, the start page for the device is open (see figure 35).
Figure 35.
The AV Controls pane (see figure 35,
to minimize the pane when additional screen area is required for other functions. Press the
arrow again to return the pane to its normal size.
The Global Navigation Ribbon contains options for input and output configuration,
EDID management, image settings, image size and position, audio configuration, and device
settings (see figure 35). Click the icons to access the following pages:
3
4
5
6
7
3
3
2
2
1
1
AV Controls and Input Configuration Page (MPS 602 SA Shown)
Input Config − contains user configurable fields and status displays for each input.
These include input number, signal type, HDCP status, and HDCP authorization.
EDID Minder − provides management of the EDID information between the switcher
and one or more input sources.
Image Settings − provides signal sampling and picture control settings for the analog
inputs.
Audio Config – Two panels configure the selected input format and gain and provide
adjustment for the mic input level, program output volume, and talk-over threshold and
level.
General Settings − provides configuration of the device name, front panel lockout
mode, and Auto-input switching.
4
4
5
5
6
6
) is always open. Click the min/max arrow (
1
MPS 602 • Configuration Software
7
7
)
2
33
Advertisement
Table of Contents
