Table of Contents
Advertisement
Audio Config Page
The MPS 601 audio provides three modes to switch active digital and analog audio inputs
to the output. Click Audio Config to access the configuration options (see figure 39,
2
2
Mode 1
3
3
Mode 2
4
4
Mode 3
Figure 39.
Audio Configuration
Mode 1 (default) – The associated audio input follows the selected input.
2
Audio input A follows input 1.
•
When input 1 is selected, RGBHV 1 video and audio input A are routed to the HDMI
output.
Audio input B follows input 2.
•
When input 2 is selected, RGBHV 2 video and audio input B are routed to the HDMI
output.
When inputs 3, 4, 5, or 6 are selected, the embedded audio of the selected input is
•
routed to the HDMI output.
Mode 2 – Audio input A is grouped with the analog inputs.
3
When input 1 or input 2 is selected, video from the selected input and audio from
•
audio input A is routed to the HDMI output.
Audio input B is disabled.
•
When inputs 3, 4, 5, or 6 are selected, the selected HDMI video and embedded
•
audio is routed to the HDMI output.
Mode 3 – Audio input A is grouped with inputs 1, 3, and 5. Audio input B is grouped
4
with inputs 2, 4, and 6.
When input 1 is selected, the selected video and audio input A are routed to the
•
output.
When input 2 is selected, the selected video and audio input B are routed to the
•
output.
When input 3 or input 5 is selected, the selected HDMI video signal is routed to the
•
output. If embedded digital audio is present on the HDMI input, it is routed to the
output. If no digital audio is present, audio input A is routed to the output.
When input 4 or input 6 is selected, the selected HDMI video signal is routed to the
•
HDMI output. If embedded digital audio is present on the selected HDMI input, it
is routed to the output. If no digital audio is present, audio input B is routed to the
output.
NOTE: When a 4K resolution signal is present on the selected HDMI input, analog
audio cannot be substituted for the embedded audio.
1
1
Audio input A follows input 1.
Audio input B follows input 2.
Audio input A follows input 1 and 2.
Audio input B is disabled.
Audio input A is grouped to inputs 1, 3 and 5.
Audio input B is grouped to inputs 2, 4 and 6.
Audio Configuration
MPS 601 • Software Configuration and Control
).
1
34
Advertisement
Table of Contents
