Table of Contents
Advertisement
X1(
=
Device name (default: MPS-602)
Name is a text string of up to 24 alpha-numeric characters and a minus sign or hyphen (-). No
blank or space characters are permitted. No distinction between upper and lower case. The first
letter must be a letter, and the last character must not be a minus sign or hyphen.
=
Input HDCP status:
X2)
0= No source connected
1=Source connected and is HDCP compliant
2=Source connected but no HDCP
Output HDCP status:
X2!
=
0= No sink detected
1=Sink detected with HDCP
2=Sink detected with no HDCP
=
Input audio format:
X2@
0=Extract embedded digital audio
1=Use analog audio input instead of embedded digital audio
2=Auto select. Embedded audio takes priority over analog audio.
=
Executive mode state:
X2#
0=off
1=front panel lockout
2=mic only lockout
=
X2%
48V phantom power
0=off
1=on
HDMI audio mute
X2^
=
0=off/unmuted (default)
1=on/muted
=
Video output selection switch status
X2&
0=DTP
1=HDMI
=
Input auto switch mode
X2*
0=disabled (default)
1=enabled (highest active input has priority)
2=enabled (lowest active input has priority)
=
Pixel phase
X3)
0 to 63 (default=32)
=
Total pixels
X3!
+255 of the default value depending on input rate
=
Horizontal or vertical start
X3@
0 to 255 (default=128)
=
Verbose mode
X3$
0=clear/none.
1=verbose mode (default).
2=tagged response for queries.
3=verbose mode and tagged response for queries.
MPS 602 • Remote Communication and Control
48
Advertisement
Table of Contents
