Table of Contents
Advertisement
DataViewer
DataViewer is an enhanced terminal emulation program that facilitates analysis of RS-232,
USB, and TCP/IP (not available for the MPS 602) communication with Extron devices. The
software allows users to send commands to a device and view the responses in ASCII or
hexadecimal format. Command and response logs can be saved in text or HTML format.
DataViewer is available at www.extron.com. Enter DataViewer in the search engine
to locate the program. Download the installation file and load the program on the PC
connected to the MPS 602.
To connect via RS-232:
1.
2.
3.
4.
5.
You are now ready to begin entering commands.
Use the DataViewer help file for more information
about program operation.
To connect via USB:
1.
2.
3.
4.
5.
You are now ready to begin entering commands.
Use the DataViewer help file for more information
about program operation.
Click the desktop icon.
The Communications Setup dialog box
opens.
Select the RS-232 tab (
1
panel RS-232 port.
In the Port Configuration panel (
configure the port settings (shown with the
correct protocol settings at right) .
To automatically connect to the MPS 602,
select Connect on startup (
Click OK (
) to start using the program.
4
Cick the desktop icon.
The Communications Setup dialog box
opens.
Select the USB tab (
) when using the front
1
panel Config port.
Choose Extron USB Device in the
drop-down list (
).
2
To automatically connect to the MPS 602,
select Connect on startup (
Click OK (
) to start using the program.
4
) when using the rear
),
2
).
3
).
3
MPS 602 • Reference Information
57
Advertisement
Table of Contents
