Table of Contents
Advertisement
An Update Complete dialog box opens (see figure 28,
Figure 28.
Update Firmware Dialog, Update Complete
6.
Click Close (
). The firmware update is complete and the device is disconnected.
2
Close all open dialog boxes. To reconnect to the MPS 602, see
Panel
on page 25.
Device Menu - Device Help
figure
Click MPS 602 Help (see
file. The Help file contains configuration and operating instructions that apply specifically to
the MPS 602.
Device Menu - About This Module
This option (see
figure
22,
firmware version of the connected device.
1.
From the Device drop-down list, select About This Module.... A dialog box
opens (see figure 29).
Figure 29.
About This Module Dialog Box
This dialog box contains the part number and version of the MPS 602 software module
currently connected to PCS.
2.
Click Close to close the dialog box.
22,
on page 27) to open the MPS 602 specific Help
5
on page 27) contains the device module part number and
6
MPS 602 • Configuration Software
).
1
Device Discovery
30
Advertisement
Table of Contents
