Table of Contents
Advertisement
2.3 COPIER INSTALLATION PROCEDURE
NOTE: Since the installation procedure is not packed with the copier as an
accessory, always bring this manual with you.
NOTE: a) Before performing the following installation procedure, be sure to
plug in the copier power cord due to the change of material of the
transfer roller. However, don't switch on yet.
For detailed information about the new roller, see the Detailed
Description section.
b) Insert the leveling shoes [A] under the leveling feet [B], and level
the machine if necessary. (The leveling feet can be screwed up or
down.)
c) Keep the factory setting data sheet under the operation panel for
future use. We recommend making a copy to be kept at your office
also.
d) Before removing the drum protective sheet, always remove all the
development units out of the copier.
A172/A199
[B]
[A]
3-6
SM
Advertisement
Table of Contents
