Table of Contents
Advertisement
CUSTOMER SERVICE GROUP
BULLETIN NUMBER:
APPLICABLE MODEL: AFICIO Color 5106/5206
SUBJECT: MAGENTA BANDING
SYMPTOM:
Magenta Banding.
CAUSE:
Insufficient conductivity of development bias between the Development Sleeve and its shaft.
SOLUTION:
A bearing must be added to the rear of the development sleeve shaft. The flange of the bearing should face
in toward the development sleeve. A lock washer has been added to insure the ball bearing does not fall off
during maintenance.
Note:
The new Development Sleeve is used for the Magenta Development unit only.The Development
Sleeve number for the Yellow Development Unit remains the same.The recommended bearing
contains conductive grease to ensure proper electrical conductivity. Do not substitute any other
parts for those listed below.
OLD PART
NEW PART
NO.
NO.
A1723214
A17233213
08053496
H0014219
UNITS AFFECTED:
All Aficio Color 5106/5206 Copiers manufactured after Serial Number A7137060001 and A7127070001
respectively will have the new parts installed.
TECHNICAL SERVICE BULLETIN
AFICIO Color 5106/5206 - 012
BALL BEARING FLANGE
FACES DEVELOPMENT
SLEEVE (6 X 10 X 3)
DESCRIPTION
Development Sleeve-M/Y
Development Sleeve-No.3
Ball Bearing 6X10X3
Lock Washer
10/17/97
LOCK WASHER
REFERENCE
QTY.
PAGE
ITEM
2-1
63
1
63
1
63
1
63
1
1
109
30
Advertisement
Table of Contents
