2.3 NEWLY-ADDED OPERATING FEATURES
No.
Features
⇒
1
Auto Image Density
Auto Color Calibration
2
Duplex Copying
3
Twin Color
4
5
Single Color
User Color
6
Color Back ground
7
Paint
8
Color Line
9
10 Frame Line
11 Image Overlay
12 Area Editing
1. Auto Image Density mode can be selected when in Full Color mode.
2. Auto Color Calibration can be performed by the user.
3. Using the by-pass feed tray, rear side copying is available.
4. Twin Color mode copies black parts in black and other parts in the
selected color.
5. Single Color
(8 colors x 4 density levels) + (12 user colors x 4 density levels) + 1 scan
color = 81 colors
* scan color = Edit type only
6. User Color
12 colors x 4 density levels = 48 possible colors
The total percentages of the mixed colors must be 255% or less.
7. Color Background
(9 colors x 4 density levels) + (12 user colors x 4 density levels) + 1 scan
color = 85 colors
* scan color = Edit type only
8. Paint (Edit type only)
(9 colors x 4 density levels) + (12 user colors x 4 density levels) + 1 scan
color = 85 colors
* Scan color = Edit type only
9. Color Line (Edit type only)
In the Area Editing mode, designated lines can be colored.
Available colors: 85 colors = 81 Single colors + (Bk x 4 density levels)
SM
(A172/A199)
Full Color & Black Copy
•
•
•
80 (+1) colors
48 colors
84 (+1) colors
84 (+1) colors
• (Edit type only)
• (Edit type only)
• (Edit type only)
See the next page
1-7
Rev. 04/99
•: Available
æ: Not Available
(A109)
Single Color & Black Copy
æ
æ
æ
8 colors
3 colors
13 colors
13 colors
æ
æ
æ
A172/A199