Table of Contents
Advertisement
Error information
(i) Message after the test
(a) If the test is successful:
•
[Test Successful] appears at the center of the screen.
(b) If the test is unsuccessful:
•
[Test Failed] appears at the center of the screen.
•
Error information appears at the lower left-hand corner of the screen.
Remarks: Error information
Error address
Segment + Offset for an area of 1 MByte or less
Check data
Value written at test execution time
Error data
Value read from the same position that was written into
(ii) Processing after the test
(a) If the test is successful:
•
Test mode: The system executes the next test.
•
Continuous mode: The system repeats the same test.
•
Execution mode: The system displays [Menu].
(b) If the test is unsuccessful:
•
The system displays the error information and [Menu].
You must press [Menu] to return to the menu screen.
SM
Main RAM Read/Write Test
" " " "
""""""""
E R R O R A D D R E S S :
""""
C H E C K D A T A
:
""""
E R R O R D A T A
:
""""
Test Count :
You must press [Menu] to return to the menu screen.
6-37
Test result message
If the test is a success, [Test
successful] appears.
If it is not, [Test Failed] appears.
M e n u
[Menu] key.
You must press this key to return
to the menu screen.
A172/A199
Advertisement
Table of Contents
