Table of Contents
Advertisement
Page
Item
SC Detection
OFF Mode
Jam Detection
OFF Mode
Printer Free Run Starts printer free run mode.
System Free
Run
<2>
-5
Scanner Free
Run
Auto Shading
Mode Data
Selection
AGC Start Lamp
Voltage
VR Adjustment
<2>
Mode
-6
APS Data
Confirmation
SM
Function
Disables the self-diagnostic
function.
Disables jam detection (ON
check).
Starts system free run mode.
Starts scanner free run mode.
Separately performs the
shading compensation
sequence.
Separately performs the auto
gain control sequence.
Turns on the exposure lamp.
Checks if the original size
sensors are correctly activated
or de-activated at the 1st and
2nd detection.
4-25
Note
Default: Reset (enable)
Default: Reset (enable)
Paper is not fed in this mode.
Paper is not fed in this mode.
When using the system free
run, close the platen cover or
place white paper on the
exposure glass to avoid toner
scattering inside the machine.
Paper is not fed in this mode.
Factory use only
Factory use only
Factory use only
Status 0 --- de-activated
Status 1 --- activated
A172/A199
Advertisement
Table of Contents
