Administrator Tools; Administrator Tools Access Procedure - Ricoh A172 Service Manual

Hide thumbs Also See for A172:

Table of Contents

2. ADMINISTRATOR TOOLS

This access procedure is for a key operator (copier's administrator), allowing

to access the administrator tools.

The procedure is as follows:

1. Press the Clear Modes/Stand-by key.

2. Input "993" using the Number keys.

3. Hold down the Clear/Stop key for more than three seconds.

NOTE: This procedure is not described in the operating instructions.

The administrator tools contain the following settings:

[1] Set Operation Modes

Maximum copy number and Auto tray switching

[2] Restrict Color Modes (User code will be required to use

restricted modes.)

Full Color / Black / Single Color / Twin color

NOTE: To enable "Restrict Color Modes", set SP mode "<4>-9 Set User

Code(s)" to ON and remove the key counter shorting connector.

[3] Set User Code(s)

[4] Check/Reset Specified Copy Counter

[5] Print All Copy Counters

[6] Reset All Copy Counters