Ricoh A172 Service Manual page 308

Error information
E R R O R R E G I S T E R
E R R O R I N D E X
E R R O R D A T A
C H E C K D A T A
Test Count :
(i) Message after the test
(a) If the test is successful:
•
[Test Successful] appears at the center of the screen.
(b) If the test is unsuccessful:
•
[Test Failed] appears at the center of the screen.
•
Error information appears at the lower left-hand corner of the screen.
Remarks: Error information
Error register Register address is displayed.
Error index Index for the register where an error occurred is displayed.
Check data Value set in the register is displayed.
Error data Read value is displayed.
(ii) Processing after the test
(a) If the test is successful:
•
Test mode: The system executes the next test.
•
Continuous mode: The system repeats the same test.
•
Execution mode: The system displays [Menu].
(b) If the test is unsuccessful:
•
The system displays the error message and [Menu].
You must press [Menu] to return to the menu screen.
SM
Test result message
If the test is a success, [Test successful] appears.
If it is not, [Test Failed] appears.
VGA Register Test
" " " "
""""
:
""""
:
""""
:
""""
:
""""
You must press [Menu] to return to the menu screen.
6-43
M e n u
[Menu] key.
You must press this key to return
to the menu screen.
A172/A199