Table of Contents
Advertisement
BULLETIN NO:
SUBJECT:
Countermeasure
1. The PTL has been changed to emit stronger light.
Part Number A0305243 + A3995243
2. The ACC target for the printer mode has been modified to decrease the maximum amount of toner
on the drum. (IPU ROM revision G)
Symptom:
This symptom can be eliminated by disconnecting the PTL, however the side effect may be magenta
toner blasting in 2C mode. This is because the purpose of the PTL is to cause minor cyan toner
Scattering which will repel the scattered magenta toner.
Savin Corporation
Technical Service Operations - P.O. Box 10270, Stamford, Connecticut 06904 --- (203) 967-5000
CYAN TONER BLASTING IN PRINTER MODE
I
Page 2 of 2
Advertisement
Table of Contents
