Timer Function Setting (Weekly Timer/Auto Off Timer/Simple Timer) - Mitsubishi MA Series Technical Manual

4.3.2 Timer function setting (Weekly timer/Auto off timer/Simple timer)

The following settings can be made.
Weekly Timer (default) : The weekly timer can be used.
Auto Off Timer
Simple Timer
Timer Mode Off
* If the clock function is disabled (OFF), "Weekly Timer" cannot be selected.
■ Clock function setting
The following settings can be made.
ON (default) : The clock function can be used.
OFF : The clock function cannot be used.
* If "OFF" is selected to disable the clock function, the weekly timer cannot be used to make day of the week/time settings.
To use the weekly timer to set the day of the week and time, the clock function must be set to "ON" (default).
To Use the Clock
MODE
(1) While pressing the
function selection mode.
(2) Press the MODE button until
[Display ]
MENU
(3) Press the button to select "CLOCK" on the screen (at
ON/OFF
(4) Press the
[Display ]
MODE
(5) While pressing the
ON/OFF
* If you press the
■ Day of the week and time setting
● The day of the week and time can be set and changed.
[The time can be set in 1-minute increments.]
Notes
• This setting is not possible if the clock function is disabled by the function setting.
• The day of the week and time are not displayed if the clock function is disabled by function selection.
• This setting is not possible if the simple timer or auto off timer has been selected.
: The auto off timer can be used.
: The simple timer can be used.
: Timer mode cannot be used.
■ Display ex am ple
(1) (5)
(2)
(3)
(4)
button, press the
MODE
appears on the screen (at
SELECTION
CHANGE FUNCTION
LANGUAGE SELECTION
button so that "ON" appears on the screen (at
ON/OFF
button, press the
MODE
button before the
ON/OFF
button for two seconds to activate the remote controller's
).
MODE DISP MODE
SELECTION SETTING
).
).
button for two seconds to return to normal mode.
button, the settings you have made will be cancelled.
21