Icon
Title
Install
Install
Error
Install
Error
1058
Error Messages
Message
All processes have succeeded. 7316.10: Engineering Setup >System >Install/
Target: MENU
Error code:
INSTALL_UNCOMPRESS_ER
ROR
Program file: XXXXX
Target: MENU
Error code:
Error message received from
the Switcher/DME/Panel
Processor
Program file: XXXXX
Target: XXXXX
Error code: XXXXX
Program file: XXXXX
Target: XXXXX
Error code:
INSTALL_ERR_NOCONFIG
No config file is found.
Target: XXXXX
Error code:
INSTALL_ERR_NOPROGRAM
No program file is found.
Description
Unit Config >Install
In the above menu, the installation procedure
completed successfully.
During software installation, an attempt to
uncompress a file failed.
During software installation, an error occurred
on the Switcher/DME/Panel Processor.
The displayed message is the same as shown
in "Error Messages Shown in the Error
Information Menu" (page 1061).
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, if an error occurs during
installation, this shows:
1. Target: Target device for installation
2. Error code: Message returned by device
3. Program file: Program file name where error
occurred
Check the following, and try the installation
once more.
•Are you using the correct software package?
•Has it been downloaded correctly? (Retry
download)
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, when installing, an
installation settings file could not be read in
correctly.
Download another set of installation files, and
try the installation once more.
7316.10: Engineering Setup >System >Install/
Unit Config >Install
In the above menu, when installing, a program
file included in the installation settings file could
not be read in correctly.
Download another set of installation files, and
try the installation once more.