LEDs, connectors, buttons, card slots
2.2 LEDs to display operation
2.2
LEDs to display operation
The LEDs on the CMR provide information about the operating status of the device and the
two inputs/outputs.
Meaning of the LEDs
LED
All LEDs
L
Power supply
P1
LAN
R
Signal strength (mobile wireless)
30
Status
Meaning
Flashing
Fatal error
Lit
Firmware being updated
Not lit
No voltage present or applied
•
Device shut down
•
Off
No external power supply connected
On
Power supply connected
Flashing
Initialization or change to the configuration
Lit green
Connection to Ethernet is established.
Part flashes yel-
Data
low and part lit
green
Off
No connection to Ethernet or no cable connected.
Lit green
Very good
Lit yellow
Medium
Off
No or very bad signal
Flashing
Data
LOGO! CMR2020,
Operating Instructions, 10/2016, C79000-G8976-C356-03
LOGO! CMR2040