Siemens LOGO! CMR2040 Operating Instructions Manual page 150

Approvals
FM certification
Factory Mutual Research (FM):
Approval Standard Class number 3600 and 3611
Approved for use in:
Class I, Division 2, Group A, B, C, D, Temperature Class T4A, Ta = 70 °C
Class I, Zone 2, Group IIC, Temperature Class T4, Ta = 70 °C
National wireless approvals
To operate the device in certain countries approvals for wireless operation must exist, the
agreed marking must be present on the type plate and special instructions for the particular
country must be adhered to. Some of the national approvals and instructions are shown
below.
Australia / New Zealand - RCM
Valid only for the CMR2020
The CMR meets the requirements of the AS/NZS 2064 standards (Class A).
Australian Communications and Media Authority, for compliance levels 1, 2 and 3 in
Australia and levels of conformity 1, 2 and 3 in New Zealand. As required by notices under:
● Section 182 of the Australian Radiocommunications Act 1992;
● Section 407 of the Australian Telecommunications Act 1997; and
● Section 134 of the New Zealand Radiocommunications Act 1989
● Radiocommunications (Compliance Labelling - Devices) Notice 2014 made under section
182 of the Radiocommunications Act 1992
● Radiocommunications Labelling (Electromagnetic Compatibility) Notice 2008 made under
section 182 of the Radiocommunications Act 1992
● Radiocommunications (Compliance Labelling – Electromagnetic Radiation) Notice 2014
made under section 182 of the Radiocommunications Act 1992 and
● Telecommunications (Labelling Notice for Customer Equipment and Customer Cabling)
Instrument 2015 made under section 407 of the Telecommunications Act 1997
Argentina
Valid only for the CMR2020
Resolución SC 729/80 - Resolución SC 784/87
Número de Inscripción: H-15414
Bolivia
Valid only for the CMR2020
Resolución Administrativa Regulatoria ATT-DJ:RA TL LP 263/2015
150
LOGO! CMR2020,
Operating Instructions, 10/2016, C79000-G8976-C356-03
LOGO! CMR2040