Mobile Wireless Settings - Siemens LOGO! CMR2040 Operating Instructions Manual

● Data received (kB)
Number of data (kilobytes) received by the CMR.
● E-mails sent
Number of e-mails sent successfully by the CMR
● E-mails sent unsuccessfully
Number of e-mails that could not sent successfully by the CMR.
Note
Number of attempts to send
If the CMR cannot send an e-mail, it attempts twice more to send the e-mail. Following
this, the e-mail is deleted
● Reset statistics
With the button, you reset all counters for statistics in the CMR to zero.
5.10.2

Mobile wireless settings

The mobile wireless interface of the CMR connects the device to the mobile wireless
network.
Note
Costs of a mobile data connection
Remember that both when establishing or when attempting to establish a mobile data
connection and to maintain a mobile data connection, frames are exchanged that are subject
to charges.
Access parameters
You configure your mobile wireless connection in the "Mobile wireless settings" tab.
For access to the GSM mobile wireless network and to the HSPA, UMTS, GPRS or LTE
services, you require the following parameters:
● The PIN protects the SIM card against unauthorized use.
● APN is the name of the transition point from the mobile wireless network to other
connected IP networks, with the CMR to the Internet.
"Name" and "password" are used to keep APN access secure.
You will receive these access parameters from your mobile wireless provider.
LOGO! CMR2020, LOGO! CMR2040
Operating Instructions, 10/2016, C79000-G8976-C356-03
Configuration (WBM)
5.10 WAN
87