Siemens LOGO! CMR2040 Operating Instructions Manual page 118

Configuration (WBM)
5.13 Monitoring
● Target element
Only with selection of the target systems "CMR" and "BM". Here, select the required
element.
– CMR: Output
– BM: Program status, GPS position
Depending on the selection you have made further drop-down lists will become available
with which you specify your action.
Other parameters
● Recipient group
When selecting a target element for sending an SMS or e-mail, you select a recipient
group, however no individual users or phone numbers.
If you select the target system "Send e-mail" the options "Subject" and "Text" are
available for which you need to select configured message texts and the option of
sending an attachment with the-e-mail.
If you select "Send SMS message" or "Send PI SMS message" as the target system, you
can choose from the SMS recipient groups you have configured.
● Subject / message text
Depending on the type of message to be sent (e-mail / SMS) you configure a subject and
a message text. You need to have configured the texts earlier in the "Message texts" tab.
You can select the transfer of the current GPS position data to LOGO! BM as an action.
Triggering events can, for example be the expiry of a timer or the status change of a BM or
CMR input.
The basic sequence for configuration remains unchanged:
1. Configure LOGO! BM settings
2. Configure signal
3. Configure event
4. Configure action with the destination "LOGO! BM"" and the target element "GPS position"
5. Configure assignment
The start address at which the GPS position data is stored in the VM of the LOGO! BM must
be in the range 0 to 112.
Data structure of the GPS position data
The block of data transferred to the BM is written byte by byte and has a length of 16 bytes.
The data block is structured as follows:
Note
Representation of the letters
Letters are represented as decimal ASCII characters: E.g. "78" for "N" and "83" for "S" and
"69" for "E" and "87" for "W".
118
LOGO! CMR2020,
Operating Instructions, 10/2016, C79000-G8976-C356-03
LOGO! CMR2040