Siemens LOGO! CMR2040 Operating Instructions Manual page 174

Additional information on SMS
B.5 Reply SMS message to the "MONITOR?" command
Table B- 2
Content
SMS header
From:
DEVICE-
Name
2016-10-05
14:14:45
CMR I:
******x1
CMR Q:
******1x
BM PS/CS:
******11
BM I:
xx0xxx10
BM Q:
xxxxx0x1
xxxxxxx1
****xxx0
BM AI:
xxxxxx
00350
Example with LOGO! BM
● The input voltage range of the analog input is 0 to 10 V:
This range is represented by values in 1 000 steps.
● A voltage at the analog input of 3.5 V has a value of 350 [00350]:
Input voltage in V * 100 = internal value of the LOGO!
● The representation of the values is 6 digits with leading zeros. One analog value is output
per line.
● Unused values are represented by x.
Values that cannot be read out are represented by "e".
● Remaining lines in a values block are omitted completely if there are no further used
values in these lines.
174
Reply SMS message
Description
Module name of the CMR
Date and time of the module
* = 6 leading spaces
* = 6 leading spaces
BM in RUN, CMR connected to BM
Input 9 ... 24 in the values block not used and not displayed
* = 4 leading spaces
Values blocks BM M, BM S, BM C and BM F not used and not displayed
No further values in this and the following values blocks, therefore not shown in the
SMS message.
LOGO! CMR2020,
Operating Instructions, 10/2016, C79000-G8976-C356-03
LOGO! CMR2040