Siemens LOGO! CMR2040 Operating Instructions Manual page 171

BM
Program status
Communication status
Digital inputs
Digital outputs
Digital flags
Shift register inputs
Arrow keys
Function keys
Analog inputs
Analog outputs
Analog flags
Structure of the reply SMS message of the process image (PI-SMS)
Note
A maximum of 7 SMS messages
The reply SMS includes a maximum total of 7 SMS messages. The number of SMS
messages depends on the monitored signals.
Meaning of "*" in the tables
"*" correspond to spaces in the structure of the reply SMS message.
Representation of digital values, shift registers
● One digit with the logical state (0 or 1).
● Eight values per line counting from right to left.
Representation of analog values
● Analog values according to the internal representation (max. 6 characters) of the analog
values of the LOGO! BM.
● The representation of the values is 6 digits with leading zeros. One analog value is output
per line.
Representation of unused values and value blocks
● Unused values are represented by "x".
● If there are no used values in the remaining lines of a value block, these lines are not
shown.
Refer to "Example of a reply SMS message" below in the value block "BM I:".
● An unused values block is not displayed nor is the name.
Representation of control keys
● 4 values per line
LOGO! CMR2020, LOGO! CMR2040
Operating Instructions, 10/2016, C79000-G8976-C356-03
B.5 Reply SMS message to the "MONITOR?" command
Status program
Connection status BM-CMR
Inputs
Outputs
Additional information on SMS
Value blocks
PS
CS
I1 ... I24
Q1 ... Q20
M1 ... M64
S1.1 ... S4.8
F1 ... F4
AI1 ... AI8
AQ1 ... AQ8
AM1 ... AM64
171