Siemens LOGO! CMR2040 Operating Instructions Manual page 105

Add a new user / Change user
● To add a new user, click the "Add" button.
The parameter group "Add a new user" is opened where you configure the parameters in
even put boxes and drop-down lists.
● To change the data of an existing user, select the user in the list at the top.
In the parameter group "Change user" you can change all the data of the user except the
user name and password.
To change the user name and password of the user as well, click the "Change login data"
button. After this, the input boxes for the user name and password are enabled.
Configuration
● Name
Freely selectable name, for example first name and surname. This name is not used as a
login to the WBM and may contain special characters.
● Description
Freely selectable text for a more detailed description of the user, e.g. "Service
technician".
● Phone number
Phone number at which the user can be reached.
You can also create phone number groups by using the * (asterisk) character. For
example, with the entry "+49172*", all phone numbers that start with "+49172" are
authorized to send SMS messages to the CMR.
Note
Note the following when using phone number groups
When using phone number groups, remember that the users of these groups cannot
receive SMS messages. The users of these groups are only authorized to send SMS
messages to the CMR.
● Allow receipt of SMS messages
"Allow receipt of SMS messages" means that the created user can send SMS commands
to the CMR.
– An SMS message of the user with the specified phone number is received and
– An SMS message of the user with the specified phone number discarded: the SMS
LOGO! CMR2020, LOGO! CMR2040
Operating Instructions, 10/2016, C79000-G8976-C356-03
evaluated (allow receipt)
message is not evaluated (do not allow receipt).
Configuration (WBM)
5.12 Users / groups
105