Maintenance; Configuration - Siemens LOGO! CMR2040 Operating Instructions Manual

● Message class
Here, you set the message class.
The message is sent depending on the class of the entries occurring.
● Recipient group
Here you specify configured groups as recipients of the notification in "Users / groups".
If no recipient group has been configured yet, the notifications cannot be activated.
Only with when sending e-mails:
● Attachment
Here, select the attachment that will be sent with the e-mail. You have the following
options:
– Current process image
– Entire diagnostics buffer
5.8

Maintenance

5.8.1

Configuration

Load Configuration
Load configuration from PC
With this function a configuration created previously and saved on the PC is loaded on the
CMR.
Configuration files have the file extension ".cfg".
1. To search for configurations on the PC, click the "Browse" button.
2. Double-click on the required configuration file.
3. To load the configuration on the CMR, click the "Load on device" button.
Result: The configuration loaded from the PC is now used.
Load configuration from SD card
With this function a configuration created previously and saved on the SD card is loaded on
the CMR.
The name of the stored configuration file is "user.cfg".
1. To load the configuration on the CMR, click the "Load from SD card" button.
Result: The configuration loaded from the SD card is now used.
LOGO! CMR2020, LOGO! CMR2040
Operating Instructions, 10/2016, C79000-G8976-C356-03
Configuration (WBM)
5.8 Maintenance
77