Siemens LOGO! CMR2040 Operating Instructions Manual page 57

Symbol
Language selection
The WBM of the CMR is available in German and English.
Default
If, for example, the Web browser is set to the English language, the WBM of the CMR is
automatically displayed in English.
If the language setting of the Web browser is not supported, the WBM of the CMR is
displayed in English.
Changing the language setting
At the top right you will see a drop-down list for the language selection. You can change the
language setting at any time.
● From the drop-down list at the right top select the required language.
The language setting is saved for the next access.
● If the language is not changed immediately, update the display in your Web browser,
generally using the function key F5.
Configuring
You configure the individual parameters on the pages of the various tabs. The following are
available:
● Input boxes for entering numbers and texts
● Drop-down lists for selecting parameters
● Check boxes for enabling and disabling functions
● Buttons for executing page-specific actions and for saving the entries ("Apply")
● Notifications and information
LOGO! CMR2020, LOGO! CMR2040
Operating Instructions, 10/2016, C79000-G8976-C356-03
Function
Switches on the automatic update of the WBM display.
Switches off the automatic update of the WBM display.
Updates the current WBM display on the "Configuration" pages.
Prints out the current WBM page
Opens the Internet page of the CMR in the Siemens Industry Online
Portal.
Here, you will find all entries for the product.
Open / save Open Source software license conditions of the CMR
Configuration (WBM)
5.2 General functions of the WBM
57