Sms - Siemens LOGO! CMR2040 Operating Instructions Manual

Simatic net logo! - industrial ethernet
Hide thumbs Also See for LOGO! CMR2040:
Table of Contents

Advertisement

Configuration (WBM)
5.10 WAN
5.10.4

SMS

In this tab you can allow or block receipt of SMS messages by the CMR.
You will find information on writing data in the appendix Additional information on SMS
(Page 163).
● Allow receipt of SMS messages
– If the option is enabled the CMR can receive SMS messages and evaluates them.
– If the option is disabled the CMR can receive SMS messages but does not evaluate
Note
Roaming cost with the option disabled
Even if the option is disabled the CMR receives SMS messages. For this reason roaming
costs can also result in even if receipt of SMS messages is blocked.
● Enable SMS password
With this option you optionally assign a password for write commands transferred by
SMS. By assigning a password write access to the CMR is better protected.
If the option is enabled, the CMR only evaluates SMS messages that contain the
configured password.
Note that if the options is disabled, SMS messages must not contain a password.
● Password for writing commands
Here, enter the password that needs to be transferred with writing SMS meesages.
● Send positive acknowledgments
After receiving an SMS message with which an error occurs, the CMR always sends an
acknowledgment with the relevant error message to the sender. This may be the result of
invalid parameters or an incomplete SMS configuration.
After receiving an SMS message with writing data that could be transferred to the
destination module, the behavior is as follows:
– If the option is enabled, the CMR always sends a positive acknowledgment to the
– If the option is disabled the CMR reacts as follows:
92
them.
The CMR does not evaluate received SMS messages regardless of the SMS rights
you have assigned for the users on the Users / groups (Page 104) page.
sender of the SMS message when the job has been handled.
After receiving an SMS message with writing data that could be transferred to the
destination module, the CMR does not send an acknowledgment to the sender of the
SMS message.
After receiving an SMS message with read commands (for example "STATUS?") the
CMR always sends a reply.
LOGO! CMR2020,
Operating Instructions, 10/2016, C79000-G8976-C356-03
LOGO! CMR2040

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Logo! cmr2020Simatic net logo! cmr2020Simatic net logo! cmr20406gk7 142-7bx00-0ax06gk7 142-7ex00-0ax0

Table of Contents