Operation: Access to BM
4.2 Reading and writing values
Example of writing a value using LOGO!Soft Comfort
Below you will find an example of the procedure for writing a value using
LOGO!Soft Comfort. You can then access the written value by SMS via the CMR.
1. In the program "LOGO! Soft Comfort" click "Tools" > "Parameter VM Mapping":
Figure 4-1
2. Select a block from your control program that you want to transfer to theVM memory.
In the following figure, select the block B007 from your control program with the
stopwatch function.
50
LOGO! Soft Comfort - tools
LOGO! CMR2020,
Operating Instructions, 10/2016, C79000-G8976-C356-03
LOGO! CMR2040