Siemens LOGO! CMR2040 Operating Instructions Manual page 173

SMS content
BM C: Name of the values block for LOGO! BM - arrow keys
xxxx
BM F: Name of the values block for LOGO! BM - function keys
xxxx
BM AI: Name of the values block for LOGO! BM - analog inputs
xxxxxx
xxxxxx
xxxxxx
xxxxxx
xxxxxx
xxxxxx
xxxxxx
xxxxxx
BM AQ: Name of the values block for LOGO! BM - analog outputs
xxxxxx
xxxxxx
xxxxxx
xxxxxx
BM AM: Name of the values block for LOGO! BM - analog memory bits
xxxxxx
xxxxxx
xxxxxx
xxxxxx
Example of a reply SMS message
● In the CMR, input 1 and output 2 are used.
● In the BM control program I1, I2 and I6, as well as Q1, Q3,Q9 and Q17 and analog input
2 are monitored.
Assumption
● BM in RUN, CMR connection to BM
● CMR: I1=1, Q2=1
● BM: I1 = 0, I2 = 1, I6 = 0, Q1 = 1, Q3 = 0, Q9 = 1, Q17 = 0, AI2 = 3.5 V
LOGO! CMR2020, LOGO! CMR2040
Operating Instructions, 10/2016, C79000-G8976-C356-03
B.5 Reply SMS message to the "MONITOR?" command
Information
Keys 4 ... 1 in the symbols
Function keys F4 ... F1, F1 right justified
Analog input 1
Analog input 2
Analog input 3
Analog input 4
Analog input 5
Analog input 6
Analog input 7
Analog input 8
Analog output 1
...
...
Analog output 8
Analog flag 1
...
...
Analog flag 64
Additional information on SMS
173