Sms Commands; B.4 Sms Commands - Siemens LOGO! CMR2040 Operating Instructions Manual

Additional information on SMS

B.4 SMS commands

What do I want to influence?
Set the status of the BM
Write current value
Set digital output of the CMR
Change phone number of a user
Configure address of an NTP server
Query mobile wireless provider using a service
code
B.4

SMS commands

The following tables describe all the possible SMS structures of the SMS commands and
these are illustrated with examples.
Note
Only 1 SMS command is possible per SMS message to the CMR.
Note
Use of prepaid SIM cards
If you use a prepaid SIM card, you can query the current credit using the appropriate service
code of your provider.
If your credit has been used up, the CMR does not send an automatic warning.
Read diagnostics data from the CMR
Function Requesting diagnostics data from the CMR
Access Reading, no password necessary
Structure and key- DIAG?
word
Return values Diagnostics data or error message: SMS error messages (Page 165)
Structure of diagnostics data:Diagnostics SMS message (Page 132)
Example Send SMS message: DIAG?
Reply SMS message: Diagnostics SMS message (Page 132)
Read GPS position from the CMR
Function Request current GPS position.
The current GPS position is read out and returned to the sender.
Access Reading, no password necessary
Structure and key- GPSPOSITION?
word
166
Example
Password;STATUS=RUN
Password;LOGO=VM125,1,WORD
Password;OUTPUT=O1,1
Password;CHANGEUSER="Joe","01721234567"
Password;NTPSERVER="217.13.75.19"
Password;SERVICECODE="*100#"
LOGO! CMR2020,
Operating Instructions, 10/2016, C79000-G8976-C356-03
LOGO! CMR2040