Reach Detection
Reach Detection
Program
Output Terminals
This parameter sets the bandwidth of the Speed Reach Frequency setting.
Reach Frequency
Program
Output Terminals
This setting establishes a frequency threshold that, when reached or is within
the Reach Detection bandwidth, will provide a signal at an output terminal that
can close an appropriately configured output contact.
Receive Address
Program
Comm Settings
This setting defines a memory location to be used for received data via a
Multicom option board.
Q7 ASD Installation and Operation Manual
Reach Detection
Reach Frequency
S20 Settings
Receive Address
Parameter Type — Numerical
Factory Default — 2.5
Changeable During Run — Yes
Minimum — 0.0
Maximum — Max. Freq.
Units — Hz
Parameter Type — Numerical
Factory Default — 2.5
Changeable During Run — Yes
Minimum — 0.0
Maximum — Max. Freq.
Units — Hz
Parameter Type — Selection List
Factory Default — 0
97