Keypad Dimensions (Mounting); Keypad Remote Mounting W/O The Asd-Mtg-Kit; Keypad Remote Mounting Using The Asd-Mtg-Kit - Toshiba Q7 Installation And Operation Manual

Keypad Remote Mounting w/o the ASD-MTG-KIT

Note: See Figure 20
1. At the keypad mounting location, identify and mark the location of the 3.80" by 3.29" hole and the
7/32" screw holes.
2. Cut the 3.80" by 3.29" rectangular hole.
3. Drill the four 7/32" screw holes.
4. Attach and secure the keypad to the front side of the mounting location using the four 6-32 x 5/16"
pan head screws, the #6 split lock washers, and the #6 flat washers.
5. Connect the extension cable.

Keypad Dimensions (mounting)

Figure 20. Keypad Mounting Dimensions.

Keypad Remote Mounting using the ASD-MTG-KIT

Note: See Figures 21
through 6.
1. At the keypad mounting location, identify and mark the locations of the 5.00" by 4.60" hole and the
four 11/32" screw holes.
2. Cut the 5.00" by 4.60" rectangular hole.
3. Drill the four 11/32" holes.
4. Attach and secure the Bezel plate to the front side of the mounting location using the four 10-32
hex nuts, #10 split lock washers, and the #10 flat washers.
5. Attach and secure the keypad to the front side of the Bezel plate using the four 6-32 x 5/16" pan
head screws, #6 split lock washers, and the #6 flat washers.
6. Connect the extension cable.
30
for the dimensions and the item locations referenced in steps
and 22 for the dimensions and the item locations referenced in steps
1 through 5.
Q7 ASD Installation and Operation Manual
1