Valcom V-D11025B Installation Manual page 18

17
Flag Mount Installation
17) Use the 6-32x12 screws to attach the display
board to the housing.
NOTE: For 2.5" Digit clocks, the holes for the
screws will be on the left and right inner surfaces of
the housing. For 4.0" Digit Clocks, the holes will be
on the top and bottom surfaces.
19
19) Place the filter over the display board. You
should hear a snapping noise as the latches drop
into place.
Valcom, Inc.
5614 Hollins Road
Roanoke, VA 24019
USA
18
18) Remove the plastic cover from the display board.
20
20) Place the housing frame onto the housing. You
should hear a snapping noise as the latches drop
into place.
P. 540-563-2000
F. 540-362-9800
www.valcom.com
18