Program Example 3 (When 5 Or More Devices Are Displayed As User-Registered Devices) - Mitsubishi FX3U SERIES User Manual

FX Series Programmable Controllers
3U
User's Manual - Hardware Edition

19.19.5 Program example 3 (when 5 or more devices are displayed as user-registered devices)

Use this program example as a reference when setting 5 or more devices as user-registered devices.
1. Operation
In this program example, the 7 devices shown in the table below are set as user-registered devices, with the
current value display format set individually for each device.
1) The display formats specified here apply only to current values which appear at the "user-registered
device" menu. Other current values appear in a decimal format.
2) In this program example, system information is assigned from D50 to D90 and from M50 to M56.
User-Registered Device
No.
1
2
3
4
5
6
7
2. Program
M8002
Initial pulse
M8002
Initial pulse
User-
User
registered
message
device
display
monitoring
command
in progress
M56 M54
User-
User
registered
message
device
display
monitoring
command
in progress
M56 M54
M60
Continued on next page
388
Devices Set As User-
Registered Devices
D100 (D101)
D102
D103
D104
D200
D210
D201
FMOV
[+] button ON
M53
SFTLP M60
M61
M67
[-] button ON
M52
SFTRP M58
M59
Display
Data Length
Format
32-Bit Hexadecimal
16-Bit Decimal
16-Bit Decimal
16-Bit Decimal
16-Bit Hexadecimal
16-Bit Decimal
16-Bit Hexadecimal
MOV K50 D8300
MOV K50 D8301
K-1 D52 K6
RST M55
ZRSTP M58 M67
SET M60
M61 K7 K1
RST M60
SET M60
RST M67
M59 K8 K1
RST M59
SET M66
MOV K8 D50
MOV K100 D51
SET M55
19 FX3U-7DM (Display Module)
19.19 User (User-Registered Device Setting)
System information (system No.1) is
set at D50 to D90.
System information (system No.2) is
set at M50 to M56.
Sets "K-1" at D52 to D57 because user-
registered devices 2 to 4 are unused.
At Monitor/Test screens other than
the "user-registered device" screen,
the current values and setting values
are displayed in a decimal format.
Initialization of the user-registered
screen's scroll flag.
Setting of flag that specifies the
default user-registered devices.
User-registered device screen scroll
program (by [+] and [-] buttons).
Sets the first device which appears at
the user-registered device screen as
a "D101, D100" 32-bit device, with a
hexadecimal current value display
format.